FlatLink MultiMount
MSRP: $286.25
Factor Direct: $229.00
Product Description
FlatLink MultiMount is designed for difficult off camber vehicle recovery scenarios where two different winch pull directions are often necessary. The two additional shackle pin mounting holes provide secure shackle attach points for multiple winch pull directions, while the center hole provides a secure conventional center pull shackle mount point. This arrangement eliminates any shackle side loading forces at the Multimount interface ( Shackles are free to rotate and align to the load directions).
Winching with a bridle arrangement is also possible by using the two outer shackle pin mounting holes in combination with common bridle rigging. Similar to the rest of the FlatLink product line, the MultiMount may be folded flat against fairlead surfaces when stowed, resulting in minimal impact to vehicle approach angles. Engineered, Tested, and Made In The USA.
Additional Information
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 5.5 × 2 in |
| Color | Red, Yellow, Gray, Orange, Lime Green |
• Replace conventional winch hooks with a safer more secure shackle/D-ring
• Multiple shackle interface for bridle and off-camber towing
• Replace conventional winch hooks with a safer more secure shackle/D-ring
• Lightweight – Precision CNC machined 6000 series aluminum
• No splicing required – titanium double shear pin design
• Designed for both steel cables and synthetic winch ropes
• Integrated EPDM rubber pads for fairlead protection
• Foldable – 1.75” thick (Compatible with all fairlead license plate mounting brackets)
• For rope and cable diameters up to 3/8’’
• Fits multiple 3/4’’ screw pin shackles
• Oval Hole opening connects to either the pin or bow end of common ¾” screw pin shackles
• Oval Hole opening connects to the pin ends of 7/8” and 1” screw pin shackles
• Fits over most OEM tow hooks
• WARNING: Keep forces in line. DO NOT SIDE LOAD SHACKLE
• Available in Military Specification Anodizing (Mil-A-8625 F Type III) Gray & powder coated finishes
• 5/8” diameter 6AI-4V titanium double shear pin
• Max Load: 16,000 pounds
• Ultimate Strength: 40,000 pounds
• Weight: 30oz
MADE IN USA
Question
emilio.nides –
It says right on the flatlink multimount not to side load and several photos show it with a side load, what gives?
(0) (0) Watch Unwatch
Factor 55 –
Hi Emilio,
Most recreational offroaders are unaware of derating the WLL when it comes to sideloading shackles and that is why the safety information is engraved on the products. You will get the strongest pull on your equipment when your rigging is in line and true. Some of those photos are simply for demonstration purposes but it is OK to sideload if you derate your WLL and take into consideration how the load will affect your rigging. Information about sideloading shackles can be found via The Crosby Group here- http://www.thecrosbygroup.com/html/en-US/pdf/pgs/91.pdf
The FlatLink Multimount has engraved degree marks on the shackle pin mounting holes to help you configure your WLL in a sideloading scenario so you can be as safe as possible during a winching or complex recovery scenario.
For any more info please email sales@factor55.com or feel free to give us a call at 208-639-1674
Thank you!
(2) (0)
Question
D –
Can you use the Flatlink Rope Guard on this?
(0) (0) Watch Unwatch
Factor 55 –
Absolutely! The FlatLink Rope Guard works FOR THE FOLLOWING PRODUCT APPLICATIONS; FACTOR 55 FLATLINK, FLATLINK E, FLATLINK MULTIMOUNT, and FLAT SPLICER
Thank you!
(0) (0)