HitchLink PRO
MSRP: $168.98 - 226.16
Factor Direct: $135.00 - 180.00
Product Description
Machined USA billet aluminum 2-inch & 2.5-inch hitch receiver recovery point. Industry-first recovery point designed for either common steel screw pin shackles, or synthetic soft shackles. Innovative features include the oversized smooth corner radius for less stress on synthetic fibers, as well as the unique internal cylindrical surface to support steel shackle pins. Only Available in Mil-Spec Hard Anodized Gunmetal Gray finish. 50,000-61,000 pound breaking strength. Engineered, Tested, and Made In The USA
- Turn your hitch receiver into a recovery point
- Large radius for soft shackles
- Unique cylindrical surface to support steel shackle pins
- Cross drilled for horizontal or vertical rigging orientation
Validated through destructive testing at 50,000-61,000 lbs breaking strength.
First hitch recovery point with optimal designs for both steel and synthetic rigging.
MADE IN USA
Additional Information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | HitchLink PRO 2.0, HitchLink PRO 2.5 |
Question
PATRICK ONEIL (verified owner) –
What is the diameter of the opening for a shackle pin on the HitchLink PRO 2.0?
(0) (0) Watch Unwatch
Factor 55 –
It’s .925 inches
Thanks!
(0) (0)
Question
wjackson –
What’s the difference between the HitchLink Pro 2.5 and the HitchLink 2.5? (besides the difference in price).
(0) (0) Watch Unwatch
Factor 55 –
The PRO is better accommodating for use with soft shackles.
(0) (0)
Question
KC Mares –
What is the worklng load limit of the 2″ hitch?
(0) (0) Watch Unwatch
Factor 55 –
9500lbs. The 2″ WLL is the same as your hitch receiver itself. Although, the 2.0 does not see destructive failure until above 51,000 lbs.
Thanks!
(0) (0)
Question
LEE COOKE –
I HAVE A 2.5″ OPENING ON MY RECEIVER WILL THE 2.5 WORK??
IT SAYS THE DIMENSIONS ARE 8.75 × 3.25 × 3.25 in
AND THE 2.0 IS Dimensions 7.25 × 2.25 × 2.25 in.
(0) (0) Watch Unwatch
Factor 55 –
Yes, it will work. Apologies for the confusion, the dimensions section is calling out the box size the part ships in.
Thanks!
(0) (0)